Full Manufacturing Capacity
At ASSM, we have the expertise and capacity to handle and manufacture the following:
- Sheetmetal in mild steel, galvanised or stainless steel
- Sheetmetal in sheet form or coil up to 4 mm thick
- Sheetmetal cutting and forming up to 4 mm thick and 3000 mm long.
- Spiral ducting from 3″ (76 mm) ø to 55″ (1397 mm) ø and in standard length of 3 m and 4 m long (6 m long on request).
- Spiral ducting in galvanised or stainless steel and material thickness between 0.6 mm and 1.2 mm.
- Speedlock type ducting from 75 mm ø to 500 mm ø and in standard lengths of 1500 mm.
- Welded ducting and fittings in mild steel, galvanised or stainless steel up to 3 mm thick.
- Small to medium structures, bins and hoppers.
- Table tops and benches in galvanised or stainless steel.
You Imagine It,
We’ll make it
If you can think of it, we most likely can manufacture it for you. From fume cabinets to stainless steel bench tops and even children’s playground equipment.
Some of the products manufactured to our high standards of quality:
- Bulk Bag Unloaders
- Cyclones and Hoppers
- Flues for afterburners
- Service Platforms and Ladders
- Spray Booths and cabinets
- Fume Hoods
- Water tight tanks